A serpentine belt known as such, as a result of it winds or snakes round totally different equipment in an engine. The Ford Taurus has a real serpentine belt, which runs all of the equipment. It’s a ribbed belt with grooves in it. Though Ford recommends checking the belt each 30,000 miles or 24 months, based on some documentation, a serpentine belt on a Ford Taurus can last as long as 100,000 miles.
Ford Taurus Replace the Serpentine Instructions
Discover the automated serpentine belt tensioner. The tensioner pulley has a bolt you’ll rotate to launch stress on the belt. Rotate the tensioner along with your 15mm-wrench. For a OHV engine sorts, you will rotate the tensioner clockwise; for OHC engine sorts, you may need to rotate it counter-clockwise.
Slip the previous belt off and slowly launch the tensioner.
Use your reminiscence or a belt routing diagram to place the new belt on. Ford normally features a belt routing diagram on the fan shroud or elsewhere in the engine compartment. There additionally could also be one in your proprietor’s documentation.
Put the new belt on by rotating the tensioner once more, then slowly launch the tensioner to regain rigidity on the belt. Be sure the belt is seated accurately on all pulleys and that the ribs on the belt are accurately lined up with the pulley grooves. Run the engine and observe to make sure appropriate set up.
[source ehow.com]
